Command stream stat

From SmartSDR Wiki
Jump to: navigation, search

Show Stream Status

In a non-networked configuration, streams flow from the FPGA to the DaVinci. These streams carry RF data in IQ format for both demodulation and for delivering to clients as well as FFT data. The streams must be configured properly in the DaVinci processor before they are sent from the FPGA. This command will show what the DaVinci is seeing from the FPGA and if there are any errors for in-bound streams and also the outbound streams to connected clients and their respective speeds. IN streams are from the FPGA to the daVinci and OUT streams are from the daVinci to client computers.

SmartSDR> stream_stat

Stream stat.png