SmartSDR Ethernet API

From SmartSDR Wiki
Revision as of 20:40, 18 October 2012 by Stephen Hicks (Talk | contribs) (Created page with "The SmartSDR Ethernet API has a number of distinct pieces: #The SmartSDR Command API which is used to command the radio and receive streaming status in...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The SmartSDR Ethernet API has a number of distinct pieces:

  1. The SmartSDR Command API which is used to command the radio and receive streaming status information from the radio. The command API is uses TCP/IP port 4992.
  2. Streaming data is sent from the radio in the VITA-49 format from UDP/IP port 4991 to targeted clients. This data carries:
    1. FFT data used in panadapters and waterfall displays
    2. Oscilloscope data used to draw audio vs. time data
    3. Streaming I/Q data for demodulation by other computer software