TCP/IP filt

From SmartSDR Wiki
Revision as of 15:06, 21 February 2018 by Billy Jones (Talk | contribs)

Jump to: navigation, search


Set the filter parameters for a slice

C[D]<seq_number>|filt <slice> <low> <high>
where <slice> is the slice index on which to change the filter
      <low> is the low cut in Hz
      <high> is the high cut in Hz


C19|filt A 100 2800

See Response Format for details on the format of the response messages from the radio

Hex Response Message Debug Output / Meaning
00000000   OK
5000002C   Incorrect number of parameters

Response Example: