TCP/IP memory

From SmartSDR Wiki
Jump to: navigation, search

REMOVE

C[D]<seq_number>|memory remove <memory_index>

Example:

C19|memory remove 3

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000   OK
5000002C   Incorrect number of parameters

Response Example:

R19|0|

APPLY

C[D]<seq_number>|memory apply <memory_index>

Example:

C19|memory apply 3

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000   OK
5000002C   Incorrect number of parameters

Response Example:

R19|0|

SET

C[D]<seq_number>|memory set <memory_index> owner=<owner> group=<group_name> freq=<MHz> name=<channel> mode=<mode> step=<Hz> repeater=<down|simplex|up> repeater_offset=<MHz> tone_mode=<off|ctcss_tx> tone_value=<text> power=<0-100> rx_filter_low=<Hz> rtty_mark=<Hz> rtty_shift=<Hz> digl_offset=<Hz> digu_offset=<Hz>

Example:

C19|memory set 3 Flex Expedition 

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000   OK
5000002C   Incorrect number of parameters
50000033   Parameter out of Range

Response Example:

R19|0|