TCP/IP preamp

From SmartSDR Wiki
Jump to: navigation, search

PREAMP

must include scu before the command call

C[D]<seq_number>|scu preamp <rx> <mode>

<rx> = 0 for the first SCu, 1 for the second (6700 ONLY)
<mode> = preamp mode. Valid modes are off, 1, 2, both

Example:

C19|scu preamp 0 1

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000   OK
50000019   Unknown Preamp
5000002C   Incorrect number of parameters
5000002D   Bad Field

Response Example:

R19|0|