TCP/IP atu

From SmartSDR Wiki
Jump to: navigation, search

ATU Information

Only radios with a transmitter will have an integrated antenna tuner. Some radios, such as the FLEX-6300, have the antenna tuner as an option. Each individual receiver may have different antenna specifications and may have different tuning ranges.

START

Start the antenna tuner to find an antenna match. Note that there must be a slice designated as the transmitter and the radio transmit state must be READY. READY indicates that the radio can transmit on the selected frequency.

C[D]<seq_number>|atu start

Example:

C14|atu start

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000 ATU starting tune cycle
50000016 Malformed Commmand

Response Example:

R14|0

BYPASS

Place the antenna tuner in bypass mode. In bypass mode, the antenna tuner is removed from the path between the transmitter and the selected antenna.

C[D]<seq_number>|atu bypass

Example:

C14|atu bypass

See Response Format for details on the format of the response messages from the radio

Responses
Hex Response Message Debug Output / Meaning
00000000 ATU now in bypass mode

Response Example:

R14|0